Sony RM-VL610 - Manual (Page 5)

1
Place the RM-VL610 head to
head with your VCR’s
remote control.
2
Set the RM-VL610 for
“learning” mode.
Press and hold SET for at least
3 seconds until the SET
indicator flashes.
3
Press the desired
Component Select button.
If your component does not work as supposed even if the code
number is set, make the RM-VL610 “learn” the functions of
your component’s remote control.
Learning function
Example: To “teach” the H (play) signal of your video cassette
recorder to the VCR H button of the RM-VL610
VCR’s remote
control
RM-VL610
4
Press the button you
want to “teach.”
5
Press and hold the H
(play) button of your
VCR’s remote control until
the VCR button of the
RM-VL610 lights up.
6
Repeat Steps
4
and
5
to
“teach” other functions.
7
Finish setting.
For more details, see page
16
.
2 – 4 inches
(5 – 10 cm)
away (approx.)
Press SET.
5