Sony RM-VL610 - Manual (Page 27)

27
Example: To clear the Power-on
command
1
Press and while holding
SET, press MENU.
The SET indicator lights up.
Adding an Extra
Function to the
Component Select
Buttons
Programming the Power-On
command of the selected
component just by pressing
that Component Select
button (for Sony
components only)
When a code number of a Sony
component is set to a Component
Select button, the Power-On signal
is automatically programmed to
the button. You can select the
desired component and power it
on by just pressing that
Component Select button.
2
While holding POWER
pressed, press the desired
Component Select button.
While the POWER button is
pressed, the Component Select
buttons that Sony components
are set to flash in the following
order.
TV
tDVDtSATtCBLt
VCR tCDtTAPEtAMP
The Component Select buttons
that Sony components are not
set to do not flash.
Continued