Savin 4700WD - Manual (Page 32)

User Tools (System Settings)
20
2
❖ ❖ ❖ ❖ Original Output Tray
Specifies the original output to use when the power is turned on, or the
{Clear
Modes/Energy Saver
} key is pressed.
• Upper
• Rear Straight: Edge Hold
• Rear Straight: Release
• Rear (Document Roller)
Note
❒ Default: Upper
❒ Select the output tray as follows:
• For output to the Front
→Upper
• For output to the Rear with the originals being gathered
→ Rear: Edge
Hold
• For straight output to the rear. without the originals being gathered →
Rear (Straight)
• For the document roller → Rear: Release
❖ ❖ ❖ ❖ Copy Output Tray
Specifies the paper output tray to use when the power is turned on or the
{Clear Modes/Energy Saver} key is pressed.
• Front
• Rear
Note
❒ Default: Front
❖ ❖ ❖ ❖ Paper Edge Hold
When copying with copy output to the front tray with large paper sizes, such
as A0(E)
K or A1(D)K, you can have the machine gather the trailing edge of
the paper so that the paper does not fall on the floor. This setting specifies
whether to use that function or not.
To use the function, select the [On] key, if you do not want to use the function
select the [Off] key.
• On
• Off
Note
❒ Default: On
DolphinGB-Syst-F_V4_FM.book Page 20 Wednesday, May 2, 2001 1:19 PM