System functions, The automatic alarm display, Displaying fuel consumption information – Subaru Monitor User Manual
Page 9
10
Displaying Vehicle Information and Programming Vehicle System Functions
Displaying fuel consumption information and programming for the automatic alarm display
■ Displaying fuel consumption information
Use the following procedure to display the current fuel consumption rate, average fuel consumption rate,
and range you can drive on the remaining fuel.
1
Select .
The fuel consumption information screen will be displayed.
This completes the procedure.
NOTE
• Current and average fuel consumption rates will change all time due to driving and other conditions. The displayed data, including
remaining fuel range data, may be different from the actual values. It is advisable that you refuel well in advance of reaching a displayed
distance.
• Displayed current and average fuel consumption rates are based on estimates during running, not on accurate measurements.
• The average fuel consumption rate is associated with the driving after the last resetting of each trip meter. If the A or B trip meter is
reset, the average fuel consumption rate will also be reset. After resetting the trip meter, the average fuel consumption rate will not be
displayed until the vehicle has been driven approximately 1 mile from the reset point.
Press the
button.
00X_Monitor_r4 05.2.24 7:16 PM Page 10