Sunbeam EM0480 - Manual (Page 13)

11
Care and Cleaning (continued)
3. Press and hold down the ‘UNLOCK’ button
at the rear of the motor base and with the
other hand turn the grind adjustment collar
anti-clockwise until the graphic arrow on
the collar is aligned with the arrow on the
motor base, see figure 10.
4. Lift out the top burr from the grind
adjustment collar using the handle, see
figure 11. Clean using the burr-cleaning
brush.
5. Lift the grind adjustment collar away from
the motor base and clean with the brush,
see figure 12.
6. Clean the bottom burr using the burr-
cleaning brush, see figure 13.
7. Once both burrs are cleaned, return the
grind adjustment collar to its position in
the motor base.
8. With the grind adjustment collar in hand
align the arrow on the collar with the arrow
on the rear of the motor base, press down.
9. Replace the top burr back into position
in the grind adjustment collar and turn
clockwise to the desired grind setting.
Figure 10
Figure 13
Figure 11
Figure 12