Symbol Technologies MC9000-K - Manual (Page 290)

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide 7-34
Magnetic Stripe Reader
This section describes how to set up and use the snap-on MSR with the MC9000-K and the MC9000-
S. The MSR snaps on to the mobile computer and can be removed easily when not in use.
Figure 7-22. MSR
The MSR:
• Provides mobile computer’s operating power and battery charging power when used with
the Symbol approved power supply and cable.
• Allows the mobile computer to capture data from magnetic stripe cards. (To download MSR
data capture software, visit:
http://devzone.symbol.com .)
• Provides serial connection through the serial pass-through port for communication with a
serial device, such as a host computer. For communication setup procedures, see
Serial
Communications Setup on page 4-10 .
• Provides USB connection through the USB pass-through port for communication with a USB
device, such as a host computer. For communication setup procedures, see
USB Connection
Setup on page 4-13 .
Card Reader Slot
Latches
Power Port Communications Port
Pogo Pin Passthrough
Connector
Latch Grip