Sound Performance Lab Gain Station 8 2383 - Manual (Page 7)

GainStation 8 7
It makes good sense to think about where you place your
GainStation 8 before connecting it. It should be positioned so
that you can easily reach it, but there are other considerations.
Try not to place it near heat sources or in direct sunlight,
and avoid exposure to excessive vibrations, dust, heat, cold
or moisture. It should also be kept away from transformers,
motors, power amplifiers and digital processors.
IMPORTANT NOTE: When installing the GainStation 8 in a rack,
please be sure to leave about a unit (1.5 to 2 inches) of space
above it to ensure sufficient circulation. If possible, install the
unit in a rack with other analog units to avoid interference
from digital units, such as clock frequencies. We recommend
covering the empty rack space above the GainStation 8 with a
blind panel to reduce the amount of dust and debris sucked into
the unit by its fan. The fan side of the housing must always be
kept free.
IMPORTANT NOTE: Never disconnect the GainStation 8 from its
external power supply while the unit is switched on. Always turn
it off first and wait at least one minute, so that all current can
dissipate, before disconnecting the multipin connector. Failure
to do so can cause severe damage to components.
In addition, please:
• Do not open the case. You may risk electric shock and damage
to your equipment.
• Leave repairs and maintenance to a qualified service techni-
cian. Should foreign objects fall inside the case, contact your
authorized dealer or support person.
• To avoid electric shock or fire hazards, do not expose your
unit to rain or moisture.
• In case of lightning, unplug the unit.
• Always unplug the cable by pulling on the plug only; never
pull on the cable.
• Never force a switch or knob.
• Use a soft, lint-free cloth to clean the case. Avoid cleaning
agents as they may damage the unit.
Before you begin