Sony CA-TX7/TX7P - Manual (Page 14)

Mounting on Video Camera
AAAAyA<H.L0.idx>
14
5
Tighten the two screws (M4
×
6) to fix the shoulder pad.
Note
Slide the shoulder pad to its
central position before
tightening the screws.
Otherwise the screws may not
be properly fixed.
M4 × 6 screws
Removing from the camera
Follow the procedure above in reverse.
Notes on Use
Use and storage locations
Avoid using or storing the unit in the following places:
• Where it is subject to extremes of temperature
(operating temperature: –10ºC to +45ºC (14ºF to
113ºF)).
Note that in summer the temperature in a car with the
windows closed can reach 50ºC (122ºF).
• Very damp or dusty places.
• Where rain is likely to reach the unit.
• Places subject to severe vibration.
• Near strong magnetic fields
• Near transmitting stations generating strong radio
waves.
Avoid violent impacts
Dropping the unit, or otherwise imparting a violent
shock to it, is likely to cause it to malfunction.
Do not cover with cloth
While the unit is in operation, do not cover it with a
cloth or other material. This can cause the temperature
to rise, leading to a malfunction.
After use
Turn the POWER switches on the unit and camera
control unit off.
Care
If the body of the unit is dirty, wipe it with a dry
cloth. For severe dirt, use a soft cloth steeped in a
small amount of neutral detergent, then wipe dry.
Do not use volatile solvents such as alcohol or
thinners, as these may damage the finish.