Sony TRUINSTALL USB 598 - Manual (Page 30)

USB 598 USB - User Guide
30 2131141
The Connect button is available; the signal strength icon
( ), coverage indicator ( ), and the roaming icon
( ) are visible.
To connect to the network, click the Connect button.
Connecting
Watcher is establishing a connection to the network.
Connected
The connection is established. In addition to the signal strength
icon (
), coverage indicator ( ), and roaming icon
( ), the amount of time you’ve been connected and the
amount of data received (Rx) and transmitted (Tx) are also
displayed. (See the note on
page 32 .)
To end the connection, click Disconnect .
Call Dormant
You are connected to the network, but there is currently no
traffic.
Device is Locked
The modem is locked, so that others cannot use the modem
and your account. To use most of the features, you must
unlock the modem (
page 36 ).
Device is powered OFF
The modem is powered off. For more information, see
“Powering the modem off” on page 36.
Determining the type of coverage
An icon in Watcher ( ) indicates the type of coverage you
have (for example, 1X [synonym of 1xRTT] or 1xEV‐DO). See
the table on
page 28 .