Samsung HL-S5686C - Manual (Page 100)

English-100
Possible Solution
This message appears if you have connected a 1394 device
or equipment other than a supported device (D-VHS, DTV,
STB, AV-HDD, Camcorder), or if the connected device does
not support the AVC defined in the 1394 specifications, even
if the device is a supported device, when you have selected
the device to use it.
This message appears if there is a connection problem
when trying to use a D-Net device.
This message appears if the AV-HDD is booting when trying
to use the AV-HDD.
This message appears if the recording device is turned off
when trying to record using the D-Net device. Please wait a
moment until it is turned on.
This message appears if there is a connection problem when
trying to use a D-Net device. This message appears when the
response of the component device malfunctions or is incorrect.
This message appears if the AV-HDD has no space to record.
Although you have connected external devices according to
the procedures described in the manual to use the D-Net
function, the D-NET ERROR message may appear on the
screen. In this case, check to see if the jacks are damaged.
Problem
This device is unavailable for D-Net.
Connection failed. Check if the 1394
cable is connected.
Initializing…
Please wait. A recordable device
is on standby.
Connection failed. The device is
not responding.
No space left on disc.
The D-NET ERROR message
appears on the screen.
BP68-00620A-00Eng 9/14/06 5:28 PM Page 100