Samsung HL-S5686C - Manual (Page 81)

English-81
1 Press the MENU button.
Press the or button to select “Application”, then press the
ENTER button.
3 Press the or button to select a Data Application to run.
2 Press the or button to select “Data Service”, then press the
ENTER button.
• Executable Data Applications display in the Application List program.
• The DATA-SERVICE button on your remote control performs the same
function as shown above.
• When the data service is set to “Off” in the Setup menu, the item cannot
be selected because it is disabled.
Using the Data Service
Application
D-Net
Data Service √
License
Return
Application
Enter
Application
D-Net
Data Service
License
Return
Application
Enter
Receiving Data Service Signal
Preparing Data Service
BP68-00620A-00Eng 9/14/06 5:28 PM Page 81