Usefulfeatures, Operating with the remote control, Displaying and setting the break timer – Sharp XG-F315X User Manual

Page 37: Displaying the pointer, Using the spot function, Switching the eco+quiet mode, Useful, Features, Useful features, Displaying and setting the

Advertising
background image

33

Useful

Features

Operating with the Remote Control

Displaying and Setting the
Break Timer

Press BREAK TIMER.

• The timer starts to count down from 5

minutes.

1

2

Press P /R /O /Q to adjust the
length of the break time.
Increases with P or Q

5 minutes s 6 minutes s 60 minutes

Shortens with O or R

4 minutes s 3 minutes s1 minute

• The break time can be set in units of one

minute (up to 60 minutes).

On-screen display

Canceling the break timer display function

Press BREAK TIMER.

• Break Timer does not function while the pro-

jector is operating the “Auto Sync”, “FREEZE”
or “AV MUTE” functions.

Note

Switching the Eco+Quiet
Mode

Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.

• When the Eco+Quiet Mode is set to “ON”, the

sound of the cooling fan will turn down, the
power consumption will decrease, and the lamp
life will extend.

Press POINTER and press P/R/
O/Q on the remote control to move
the pointer.

Displaying the Pointer

Press SPOT and press P/R/O/Q
on the remote control to move the
spot area.

Using the Spot Function

1

Press POINTER again.

• The pointer will disappear.

2

1

Press SPOT again.

• The spot area will disappear.

2

Refer to “Lamp Setting” on page

43

for de-

tails of the Eco+Quiet mode.

Note

POINTER button

ECO+QUIET button

Adjustment buttons
(P/R/O/Q)

BREAK TIMER button

SPOT button

AUTO SYNC button

FREEZE button

PICTURE MODE button

MAGNIFY buttons

Advertising