Sharp XG-F315X - Manual (Page 38)

34
Operating with the Remote Control (Continued)
Press MAGNIFY on the remote
control.
• Enlarges the image.
• Pressing
or MAGNIFY enlarges
or reduces the projected image.
Note
´1 ´2 ´3 ´4
Press
.
Press
.
• You can change the location of the en-
larged image using P, R, O and Q.
Press RETURN on the remote con-
trol to cancel the operation.
• The magnification then returns to ×1.
Note
• The selectable magnifications differ
depending on the input signal.
• In the following cases, the image will
return to the normal size (×1).
- When switching the INPUT mode.
- When RETURN has been pressed.
- When the input signal is changed.
- When the input signal resolution and
refresh rate (ver tical frequency)
change.
- When RESIZE has been pressed.
Auto Sync
(Auto Sync Adjustment)
Freezing a Moving Image
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page
51 .)
Auto Sync function works when detect-
ing input signal after the projector turns
on.
Press AUTO SYNC to manually adjust
with Auto Sync function.
Press FREEZE.
• The projected image is frozen.
Press FREEZE again to return to
the moving image from the cur-
rently connected device.
Note
Selecting the Picture Mode
Press PICTURE MODE.
• When pressing PICTURE MODE, the picture
mode changes in the following order:
STANDARD PRESENTATION MOVIE GAME sRGB
You can select the appropriate picture
mode for the projected image, such as
movie or video game.
• See page 41 for details on the picture mode.
Note
*
* “sRGB” is displayed only when RGB signal is
input.
Displaying an Enlar ged
Portion of an Image
Graphs, tables and other portions of
projected images can be enlarged. This
is helpful when providing more detailed
explanations.
1
2
1
2