Sharp AR-C250 - Manual (Page 10)

8
5 Select the desired category on the touch panel.
Example:
To select the account control category, press the
“ACCOUNT CONTROL” key.
6 Press the key of the desired program on the touch panel.
Example:
To see the number of copies per account, press the
“NUMBER OF COPIES PER ACCOUNT” key.
● For some programs, a check box is displayed to the left of the
program name. If the box is pressed, a check mark will appear and
the program will be set. If the box is pressed again, the check mark
will disappear and the program will be canceled.
● For other programs, the program setting screen of the program
will appear when the program key is pressed.
● If and/or keys are displayed, additional programs can be
displayed using these keys.
7 Follow instructions for the program.
● If a mistake is made during entry, press the CLEAR ( C ) key to
clear the entry.
● To continue with other key operator programs, press the “OK” key
and then select another program.
8 To exit the key operator program mode, press the CLEAR
ALL key.
KEY OPERATOR PROGRAMS
ACCOUNT CONTROL
AUDITING MODE
NUMBER OF COPIES PER ACCOUNT
BILLING BY ACCOUNT
RESETTING ACCOUNT
1/2
OK
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
SETTINGS
ENABLE/DISABLE
SETTINGS
TIMER SETTINGS
ACCOUNT CONTROL
OK
KEY OPERATOR PROGRAMS
6
9
P
C
CA
CLEAR
PROGRAM
CLEAR
ALL