Sharp AR-C250 - Manual (Page 16)

14
To change an account number
1. Press the “CHANGE” key.
2. Enter the account number to be changed using the
10-key pad.
3. Enter a new account number.
4. Press the “ENTER” key.
● If a number that is already registered is entered, the message
“
THIS NUMBER IS ALREADY USED. ” will appear. Press the
“OK” key and enter another number.
5. To change other account numbers, repeat steps 2 to 4.
Press the “OK” key twice to exit the program.
To print all registered account numbers
1. Press the “PRINT” key.
● The copier will start printing. To stop printing after starting,
press the “CANCEL” key.
2. Press the “OK” key to exit the program.
Price/Copy Setting
This program is used to set the price per copy. Four price per copy
values can be set (#1, #2, #3, and #4). As copies are made, the
cumulative cost of the copies is kept in memory.
When the “PRICE/COPY SETTING” key is pressed, the following
display will appear.
1. Enter the new price for price code #1 by using the 10-key
pad and then press the “ENTER” key.
● Use the INTERRUPT key for decimal points.
● If the “ENTER” key is pressed without entering a value, the
price per copy will not be changed.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
PRICE/COPY SETTING
PRICE CODE
# 1 80
# 2 60
# 3 180
# 4 90
PRESENT PRICE NEW PRICE
INPUT NEW UNIT PRICE AND PRESS [ENTER].
USE INTERRUPT KEY FOR DECIMAL POINT.
1/2
OK
ENTER