Sanyo Katana LX - Manual (Page 97)

ⅷ Battery
ⅷ Status (all of the above except phone number)
1. Press and hold or .
2. If you hear “Say a command,” say “ Check .”
3. If you hear “Which status item?,” say a command.
ASR Options
To change ASR confirmation:
1. Press and hold or .
2. Press Settings (right softkey) > Confirmation and
select an option.
Ⅲ Automatic to ask for confirmation only when the
system is not sure what you said.
Ⅲ Always Confirm to always ask for confirmation.
Ⅲ NeverConfirm to never ask for confirmation.
To adapt the system to your voice:
1. Press and hold or .
2. Press Settings (right softkey) > Adaptation >
Adapt Voice .
3. Press Start (left softkey) and repeat each word,
phrase, or telephone number you hear.
To reset the adaptation, select Reset Voice on the step 2
above.
To change the ASR mode:
1. Press and hold or .
2. Press Settings (right softkey) > Modes and select an
option.
Ⅲ Expert Mode to sound a beep only.
Ⅲ Prompt Mode to prompt for required information.
Ⅲ Readout Mode to prompt for required information
and to read aloud the content displayed on the
main screen.
To change the ASR dialing region:
1. Press and hold or .
2. Press Settings (right softkey) > Dialing region and
select an option.
Ⅲ North America to recognize only numbers valid in
North America.
Ⅲ Other to recognize any number regardless of
location.
To display the ASR software version:
1. Press and hold or .
2. Press Settings (right softkey) > About .
Section 2H. Voice Services 85
V
o
ic
e
S
e
rv
ic
e
s