Sony BDV-T10 - Manual (Page 68)

68 US
[Subwoofer]
[Yes]
x [Distance]
When you move the speakers, be sure to set the
parameters of the distance (A) from the
listening position to the speakers.
You can set the parameters from 0 to 23 feet (0.0
to 7.0 meters).
The speakers in the illustration correspond to the
following:
1 Center speaker
2 Front left speaker (L)
3 Front right speaker (R)
4 Subwoofer
5 Surround left speaker (L)
6 Surround right speaker (R)
7 Surround back left speaker (L) (optional)
8 Surround back right speaker (R) (optional)
[Front Left/Right] 10 ft/3.0 m: Set the front
speaker distance.
[Center]* 10 ft/3.0 m: Set the center speaker
distance.
[Surround Left/Right]* 10 ft/3.0 m: Set the
surround speaker distance.
[Surround Back Left/Right]* 10 ft/3.0 m: Set the
surround back speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the subwoofer
distance.
* This item appears when you set to [Yes] in the
[Connection] setting.
Note
• Depending on the input stream, [Distance] may not
be effective.
Tip
• You can change a measurement unit (feet or meters)
by pressing the color button (RED).
x [Level]
You can adjust the sound level of the speakers.
You can set the parameters from –6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Center]* 0.0 dB: Set the center speaker level.
[Surround Left/Right]
* 0.0 dB: Set the surround
speaker level.
[Surround Back Left/Right]
* 0.0 dB: Set the
surround back speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
* This item appears when you set to [Yes] in the
[Connection] setting.
x [Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
select one of the [Speaker Settings] items, the
test tone is emitted from each speaker in
sequence.
Adjust the sound level as follows.
1
Set [Test Tone] to [On].
2
Press X/x to select [Level], then press
.
3
Press X/x to select the desired speaker
type, then press .
4
Press C/c to select the left or right
speaker, then press X/x to adjust the
level.
5
Press .
6
Repeat Steps 3 to 5.
7
Press RETURN.
The system returns to the previous display.
8
Press X/x to select [Test Tone], then
press .
A
A
2
5
7 8
6
1
4
3