Sam4s ER-390M - Manual (Page 103)

ER-390M Program Mode Programming • 95
Program 250 – PLU Stock Amount Programming
With this program, you can you can add stock to the PLU sales counters for PLUs you have designated
as stock keeping PLUs. See “Program 100 – PLU Status Programming”. The stock number set here
can be the amount of stock that is being added to the current level, or optionally, it can be the new total
stock level. See option #18 in “System Option Programming” to set this option.
1. Turn the control lock to the P position.
2. To begin the program, enter 2 5 0, press the SBTL key.
0 SBTL 5 2
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
• Enter up to 14 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range;
press the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME
key.
X/TIME
Stock Amount
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH