Sam4s ER-390M - Manual (Page 62)

54 • Operating Instructions ER-390M
Table Management and Clerk Interrupt Operations
Overview
The ER-390M can employ a manual previous balance, hard check, or soft check system.
(You must select hard or soft check posting in memory allocation programming - the default
selection is soft.)
There are two methods in ER-390M to manage check track. One is table management system
and the other is clerk interrupt system. If you want to use clerk interrupt system.
First, Program as below.
To Enter Clerk Interrupt System (To Exit Table Management system)
1.Program Clerk Secret Code
2.Set system option #2 to a value of 1. See "System Option Programming"
3.Set system option #26 to a value of 1. See "System Option Programming“.
To Exit Clerk Interrupt System (To Enter Table Management system)
♦ Set system option #26 to a value of 0. See "System Option Programming“.