Sony DPF-A73/E73 - Manual (Page 22)

22 GB
Connecting to a computer
1
Connect the AC adaptor to the photo frame, and to
the AC power source.
2
Connect the computer and photo frame with a
commercially available USB cable.
3
Turn the photo frame on.
4
Operate the computer to exchange images with the
internal memory of the photo frame.
x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 /
Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (v10.4 or later)
Port: USB port
To USB B
connector
To USB connector Computer
P Notes
• Use a B-Type USB cable.*
* When you use a commercially-
available USB cable, use a
USB cable with a B-type plug
(for the USB B connector of
this unit, frame-side connector
type) shorter than 3 meters.
• If multiple USB devices are
connected to a computer or if a
hub is used, a problem may occur.
In such a case, simplify the
connection.
• You cannot operate the photo
frame from another USB device
being used simultaneously.
• Do not disconnect the USB cable
during data communication.
• Operation with all computers that
satisfy the recommended system
requirements is not guaranteed.
• The photo frame has been
demonstrated as operable when
connected to a computer and a
Sony digital photo printer. When
other devices are connected to the
photo frame, these devices may
not recognize the internal memory
of photo frame.