Sony K608i - Manual (Page 28)

This is the Internet version of the user's guide. © Print only for private use.
28
Calling
2 If the contact has more than one number, use
and to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record
a voice command such as “John mobile” for
the phone number you selected.
3 Instructions appear. Wait for the tone and
say the command that you want to record.
The voice command is played back to you.
4 If the recording sounds ok } Yes . If not } No
and repeat step 3.
5 To record another voice command for a contact
} New voice } Add again and repeat steps 2-4
above.
To make a call from the phone
1 From standby, press and hold one of the
volume buttons.
2 Wait for the tone and say the name you
recorded earlier, for example “John mobile”.
The name is played back to you and the call
is connected.
To make a call with a handsfree
From standby, press the handsfree button,
or the Bluetooth headset button.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name on or off
} Settings } the General tab } Voice control
} Play caller name .
The magic word
You can record a magic word and use it as a voice
command to allow totally handsfree access to voice
dialling. Instead of pressing and holding a volume
button to voice dial, you say the magic word and
then one of your recorded voice commands. The
magic word is especially suitable when using a car
handsfree kit.
To activate and record the magic word
1 } Settings } the General tab } Voice control
} Magic word } Activate .
2 Instructions appear. } Continue . Wait for the
tone and say the magic word.
Choose a long, unusual word or phrase that can easily
be distinguished from ordinary background speech.