Sony K608i User Manual

Page 78

Advertising
background image

This is the Internet version of the user's guide. © Print only for private use.

78

Troubleshooting

I cannot turn on the phone

Possible cause: The battery is discharged.
Solution: Recharge the battery,

%

6 To charge

the battery.
Solution: Make sure you attached the charger
correctly. Turn the phone on with the charger
attached. If the phone starts, restart the phone with
no charger attached.

I cannot charge the phone or battery

capacity is low

Possible cause: The charger is not properly
connected to the phone.
Solution: Make sure that the charger connector
clicks properly into place when connected. The
battery icon flashes when charging is in progress,
and stops when the battery is fully charged,

%

6 To charge the battery.

Possible cause: The battery connection is bad.
Solution: Remove the battery and clean the
connectors. You can use a soft brush, cloth or q-tip,
soaked with alcohol. Make sure that the battery is
completely dry before you put it back. Check that
the battery connectors in the phone are undamaged.
Possible cause: The battery is worn out and needs
to be replaced.

Solution: Try another battery and charger for the
same phone model, or visit your retailer and ask
them to verify if the battery and charger are
working properly.

The phone turns itself off

Possible cause: The

button has been pushed

unintentionally.
Solution: Turn on the automatic key lock,
or lock the keypad manually,

%

75 Keypad lock.

Possible cause: The battery connection is bad.
Solution: Make sure the battery is inserted
correctly,

%

5 To insert SIM card and battery.

I cannot use SMS/text messages

on my phone

Possible cause: Settings are missing or incorrect.
Solution: Contact your network operator to find
out the correct SMS service centre setting,

%

36 Text messaging (SMS).

I cannot use MMS/picture messages

on my phone

Possible cause: Your subscription does not include
data capability.
Solution: Please contact your network operator.
Possible cause: Settings are missing or incorrect.

Advertising