Sony FR8/FR9 - Manual (Page 72)

72 US
Presetting Radio Stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
Press TUNER/BAND repeatedly until
the band you want appears in the front
panel display.
Each time you press TUNER/BAND, the
band toggles between AM and FM.
2
Press and hold TUNING + or – until
scanning starts, then release.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3
Press TUNER MENU.
4
Press C/c/ x / X repeatedly until
“MEMORY ?” appears in the front
panel display.
5
Press ENTER.
A preset number appears in the front panel
display.
6
Press C/c/ x / X to select/ the preset
number you want.
7
Press ENTER.
The station is stored.
8
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from step 1.
To change the AM tuning interval
The AM tuning interval can be set to either
10 kHz (default) or 9 kHz (for some areas).
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the remote, or "/1 on the
system. While holding down VOLUME + on the
system, press "/1 on the system to turn on the
power. If you change the interval, AM preset
stations will be erased.
To reset the interval, repeat the same procedure.
Enjoying the Radio
TUNER/
BAND
TUNING –/+
With cover opened.
C/X/x/c/
ENTER
TUNER
MENU
"/1
MHz
ST
ST
ST
MHz
ST
m