Sony 3-288-523-13(1) - Manual (Page 31)

31
Trou
bl
es
hoot
in
g
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
Self-diagnosis display/Warning
indicators
Indicators Causes/Solutions
C:04:ss • The battery pack is not an
“InfoLITHIUM” battery
pack NP-FH50. Use an
“InfoLITHIUM” battery
pack NP-FH50 (p. 7).
• Connect the DC plug of the
AC Adaptor to the DC IN
jack of the Handycam
Station or your camcorder
securely (p. 7).
C:13:ss/
C:32:ss • Remove the power source.
Reconnect it and operate
your camcorder again.
E:20:ss/
E:31:ss/
E:61:ss/
E:62:ss/
E:91:ss/
E:94:ss • A malfunction that you
cannot service has
occurred. Contact your
Sony dealer or local
authorized Sony service
facility. Inform them of the
5-digit code, which starts
from “E.”
101-0001 • When the indicator flashes
slowly, the file is damaged
or unreadable.
E • Battery power is low.
• The temperature of your
camcorder is getting high.
Turn off your camcorder
and leave it in a cool place.
• When the indicator flashes
slowly, free space for
recording images are
running out. For the type of
“Memory Stick” you can
use with your camcorder,
see page 5.
• No “Memory Stick PRO
Duo” is inserted (p. 12).
• When the indicator flashes
quickly, there are not
enough free space for
recording images. Delete
unnecessary images, or
format the “Memory Stick
PRO Duo” after storing the
images on other media
(p. 24).
• The Image Database File is
damaged.
• The “Memory Stick PRO
Duo” is damaged. Format
the “Memory Stick PRO
Duo” with your camcorder.
• An incompatible “Memory
Stick PRO Duo” is inserted.
- • Access to the “Memory
Stick PRO Duo” was
restricted on another
device.
• There is something wrong
with the flash.
• The amount of light is not
sufficient. Use the flash.
• The camcorder is unsteady.
Hold the camcorder steady
with both hands. However,
note that the camera-shake
warning indicator does not
disappear.
• The media is full.
• Still images cannot be
recorded during processing.
Wait for a while, then
record.
Indicators Causes/Solutions