Sony Reader 4-153-621-14(1) User Manual
Page 49
PRS-600.GB.4-153-621-14(1)
49
Importing and Transferring Content
Slide the POWER switch.
The Reader is turned on.
Note
If the Reader does not turn on, the battery has been fully
depleted. In this case, go to the next step. Although charging is
in progress (charge indicator lights up in red), the Reader will
not turn on until
(indicating connection via USB) appears
on the screen (it takes about 5 minutes).
Connect the Reader to your computer using the
supplied USB cable (
Reader Library starts automatically and “Reader”
appears in the Source view of Reader Library.
Notes
If Reader Library does not start automatically, start it manually
by double-clicking the desktop icon.
If “Reader” does not appear in the Source view after
connecting the Reader to your computer, disconnect the USB
cable from the Reader, then reconnect it after a while.
If the Reader in the shutdown state is connected to your
computer, the Reader will not be recognized by your computer.
Make sure to turn on the Reader before USB connection.
Insert a memory card into the appropriate memory
“Memory Stick on Reader/SD Card on Reader” appears
in the Source view.
Continued