Sony Reader 4-153-621-14(1) - Manual (Page 13)

PRS-600.GB.4-153-621-14(1)
13
Getting Started
Charging the Reader
About charging
You need to charge the Reader when using it for the first
time, or when the remaining battery power is low. Charge in
one of the following ways.

Connect to a computer via USB.

Connect to an AC outlet using the AC Adapter for Reader (AC-
S5220E) (optional).
It will take approximately 4 hours to fully charge the battery.
Charging the Reader via USB connection
To charge the Reader via USB connection, follow the steps
below.

Make sure your computer is connected to an AC
outlet and turned on (not in sleep mode).
Continued