Using as a wired remote control, Connecting the remote control to the projector – Sharp XG-C50X User Manual

Page 28

Advertising
background image

Connecting the Projector to Other Devices

Using as a Wired Remote Control

Connecting the Remote
Control to the Projector

When the remote control cannot be used due
to the range or positioning of the projector
(rear projection, etc.), connect a ø3.5 mm
minijack cable (commercially available or
available as Sharp service par t QCNW-
4870CEZZ) from the WIRED R/C JACK on the
top of the remote control to the WIRED RE-
MOTE control input terminal.

ø3.5 mm minijack cable
(commercially available or available as
Sharp service part QCNW-4870CEZZ)

To WIRED R/C JACK

WIRED REMOTE control input terminal

-26

Advertising