Sanyo DWM-3500 - Manual (Page 48)

-E47-
Programmed Playback [CD] [MP3] [WMA] [JPEG]
Up to 12 selections can be programmed.
1
6 2
CLEAR/
CANCEL
4
3
7
1
Programming procedure
1. Press [PLAY MODE] while holding [SHIFT] down in the stop
mode.
The “Play Mode” screen (“Play Mode” and “Repeat”) appears.
Play Mode Off
Repeat Off
2. Press [ a ] to select “Program”.
The “Program” screen appears.
Play Mode Program
Repeat
1 ---
4 --- 7 --- 10 ---
2 --- 5 --- 8 --- 11 ---
3 --- 6 --- 9 --- 12 ---
Off
Clear Program Playback
Important Note:
“ ” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Random Playback [CD] [MP3] [WMA] [JPEG]
1
3
2
1. Press [PLAY MODE] while holding [SHIFT] down during
playback or stop mode.
The “Play Mode” screen (“Play Mode” and “Repeat”) appears.
Play Mode Off
Repeat Off
2. Press [ a ] to select “Random”.
Play Mode Random
Repeat Off
3. Press [ a ] to start Random Playback.
In case of Random Playback of JPEG file, press [ e ] to proceed
the Random playback.
Note:
To stop Random Playback completely, select “Off” in step 2.
3. Press the number buttons to select the track number.
Example:
To select Track No.3, press [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].
Notes:
•
If you make a mistake, press [CLEAR/CANCEL].
• To quit the “Play Mode” screen, press [PLAY MODE]
while holding [SHIFT] down.
4. Press [ 5 ] to move the highlighted box down.
Example:
Play Mode Program
Repeat
1 9--
4 --- 7 --- 10 ---
2 --- 5 --- 8 --- 11 ---
3 --- 6 --- 9 --- 12 ---
Off
/Enter/0–9/Clear/Play Mode
Clear Program Playback
5. Repeat steps 3 ~ 4 above to select another track.
6. Press [ 4 ], [ 5 ], [ b ] or [ a ] to select “Program Playback” on the
TV screen.
7. Press [ENTER].
Program playback starts in the programmed order.
In case of Program Playback of JPEG file, press [ e ] to
proceed the Program Playback.
To return to normal playback, press [PLAY MODE] while
holding [SHIFT] down and select Play Mode “Off”.
•
The program is canceled when you open the disc tray or
turn the power off.
To clear the program one by one
1. Repeat the steps 1 ~ 2 as described in “Programming
procedure” to open the “Program” screen.
2. Press [ 4 ], [ 5 ], [ b ] or [ a ] to select the track number.
3. Press [CLEAR/CANCEL].
To clear all the programs
1. Repeat the steps 1 ~ 2 as described in “Programming
procedure” to open the “Program” screen.
2. Press [ 4 ], [ 5 ], [ b ] or [ a ] to select “Clear”.
3. Press [ENTER].
To change the program
1. Repeat the steps 1 ~ 2 as described in “Programming
procedure” to open the “Program” screen.
2. Press [ 4 ], [ 5 ], [ b ] or [ a ] to select the track number.
3. Press the number buttons to select the track number to be
replaced.
Note:
To quit the “Play Mode” screen, press [PLAY MODE] while
holding [SHIFT] down.
2B80201A [E] P38-49 24/2/03, 7:15 PM 47