Sony DVP-M35 - Manual (Page 10)

Basic Operations
10 EN
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
The indicator (red) above the POWER button changes to green
and the front panel display lights up.
Press §, and place the disc on the disc tray.
Press ·.
The disc tray closes, and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.
Playing a DVD
1
• The operating procedure of CDs
or VIDEO CDs is different from
that of DVDs.
For details, see pages 14 to 17.
z
You can turn on the player
using the remote
Press POWER when the
indicator above the POWER
button on the front panel is
lit in red.
z
After following Step 4
A DVD menu or title menu
may appear on the TV screen
(see page 13).
Notes
• If you use an FM/AM tuner by
the player, turn off the player.
• If you leave the player or the
remote in pause mode for 15
minutes, the screen saver
image appears automatically.
To disappear the screen saver,
press
·. (If you want to set
the screen saver function to off,
see page 36.)
• If you don’t operate the player
or the remote for more than 30
minutes when a disc is not
being played, the power is
automatically turned off (Auto
Power Off function.)
2
Connect headphones.
Adjust the headphone
volume.
2 4 3
3
4
With the playback
side facing down
Basic Operations
Depending on the DVD, some operations may be different or restricted. Refer to the instructions supplied with
your disc.