Samsung SHR-1041 - Manual (Page 37)

English _
●
settings
hdd event
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <event/sensor>.
Select <hdd event> and use the up/down buttons
($%/ ENTER) to set a desired item.
disK FuLL event : You can set to notify the user when
the HDD is full.
- This is applied only if you have set <overwrite> in
<disK management> to <oFF>.
When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.
aLarm input
In the <system setup> window, use the direction buttons ($%_+/ENTER) to select <event/
sensor>.
Select <aLarm input> and use the direction buttons
($%_+/ENTER) to set a desired item.
operation : Set the connection status of the alarm
sensor to either ENABLE or DISABLE.
- If the alarm sensor is set to <enaBLe> and you have
set to perform recording if an alarm occurs, the Live
screen displays the alarm recording standby mode.
(Page 18)
- The INPUT type of the alarm is N/O(Normal Open).
When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.
aLarm output
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <event/sensor>.
Select <aLarm output> and use the direction buttons
($%_+/ENTER) to select and set a desired item.
operation : Set the operation of the alarm output.
- If set to <enaBLe>, the applicable menu is activated
where you can set other options.
- If set to <disaBLe>, other items will be disabled.
mode : Set the output mode of the alarm.
- If set to <Latched>, the alarm will sound for as much
time as defi ned in DURATION.
- If set to <transparent>, the DURATION item will be disabled.
hdd event : Set to use the alarm output if the HDD is full.
duration : Set the duration of the alarm output.
- If you select <until>, the buzzer will be stopped when you press any button on the front panel or the
remote control.
aLarm, video Loss, motion : Set the alarm output for each channel if an event of alarm, video
loss or motion detection occurs.
When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
.
.
•
.
.
.
•
.
.
.
•
•
•
•
•
.
CAM1 CAM1
CAM1 CAM1
EVENT/SENSOR
HDD
EVENT
ALARM
INPUT
APPLY UNDO
ALARM
OUTPUT
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
DISK FULL EVENT ON
CAM1 CAM1
CAM1 CAM1
EVENT/SENSOR
HDD
EVENT
ALARM
INPUT
APPLY UNDO
ALARM
OUTPUT
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
OPERATION
1 DISABLE
2 DISABLE
3 DISABLE
4 DISABLE
CAM1 CAM1
CAM1 CAM1
EVENT/SENSOR
HDD
EVENT
ALARM
INPUT
APPLY UNDO
ALARM
OUTPUT
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
ALARM
DISABLE
1
2
3
4
OPERATION
MODE
LATCHED
ON HDD EVENT
DURATION
5 SEC
VIDEO LOSS MOTION
02235A_SHR-1041K_ENG.indb 37 2009-02-17 오전 10:51:05