Menu system – Kenwood KDC-W311 User Manual

Page 22

Advertising
background image

22

|

English

Menu system

Function of KDC-W4037/KDC-W3537/

KDC-W3037/KDC-W311

In Standby mode

Synchronize Clock

Synchronizing the RDS station time data and this
unit’s clock.

Display

Setting

"SYNC ON"

Synchronizes the time.

"SYNC OFF"

Adjust the time manually.

• It takes 3 to 4 minutes to synchronize the clock.

In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.

Display

Setting

"DSI ON"

LED flashes.

"DSI OFF"

LED OFF.

Function of KDC-W4037

In Standby mode

Selectable Illumination

Selecting the button illumination color as green or
red.

Display

Setting

"KEY RED"

The illumination color is red.

"KEY GRN"

The illumination color is green.

Dimmer

You can lower the brightness of the display by using
the dimmer function.

Display

Setting

"DIM ON"

The display dims.

"DIM OFF"

The display doesn’t dim.

Function of KDC-W4037

In Standby mode

Switching preout

Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound outputs
without being effected by fader control.)

Display

Setting

"SWPRE R"

Rear preout.

"SWPRE SW"

Subwoofer preout.

In Audio file source

Supreme Setting

When MP3 or WMA files encoded at a low bit rate
(less than 96kbps (fs=32k, 44.1k, 48kHz)) are played,
this function restores their high frequency region
to approach the sound quality of equivalents of
these files encoded at a high bit rate. Processing is
optimized for the compression format used (MP3, or
WMA), and adjustment is made for the bit rate used.

Display

Setting

"SPRM ON"

Plays sound using the Supreme function.

"SPRM OFF"

Plays the original sound stored in the audio file.

• The sound effect may be imperceptible depending

on the relationship between the audio file format and
setting.

Function of KDC-W4037/KDC-W3537/

KDC-W3037/KDC-W311

News Bulletin with Timeout Setting

The tuner automatically changes when a news
bulletin starts even if the radio is not being listened
to. Also, you can set the time interval when
interruption is prohibited.

Display and Setting
"NEWS OFF"
"NEWS 00M"


"NEWS 90M"

Advertising