Kyocera FS-1700 - Manual (Page 12)

Introduction
xi
Disclaimer
We shall have no liability or responsibility to customers or any other person or entity with respect
to any liability, loss or damage caused or alleged to be caused directly or indirectly by equipment
sold or furnished by us, including but not limited to, any interruption of service, loss of business
or anticipatory profits, or consequential damages resulting from the use or operation of the equip-
ment or software.
Prolonged Non-Use and Moving the Printer
Prolonged Non-use
If you ever leave the printer unused for a long period of time, remove the power cord from the wall
outlet.
We recommend you consult with your dealer about the additional actions you should take to avoid
possible damages that may occur when the printer is used next time.
Moving the Printer
When you move the printer:
❒
Move it gently.
❒
Keep it as level as possible, to avoid spilling toner inside the printer.
❒
If you need to move the printer to another location, first remove the toner container,
developer unit, and waste toner bottle. After removing the developer unit from the
printer, wrap it in the supplied plastic bag and place it into the box in which the toner con-
tainer is packaged. Make sure that the waste toner bottle is securely capped and place it
in the plastic bag together with the toner container. Be sure to consult a serviceman
before attempting long-distance transportation of the printer.
((((1 1 1 1) ) ) )
Remove the developer unit.
((((2 2 2 2))))
Close the protect cover.
((((3 3 3 3))))
Pack the developer unit.
To reinstall the developer unit in the printer, use the reverse procedure of the above.
1. Disconnect
2. Push
Developer unit
Protect cover
Toner container box
Plastic
bag
(supplied)