Kyocera FS-1700 - Manual (Page 53)

2.2. Operating Procedures
2-6
2.2. Operating Procedures
Switching Power On
Check that the power cord is securely plugged in at both
ends.
Check that the printer is connected to the computer. In
switching power on, the general rule is to switch on printer
power first, computer power second.
1. Push the power switch to the ON ( | ) position.
2. Wait for the printer to warm up. During warm-up the
message display indicates

.
At the end of the warm-up period, the ON LINE indicator
lights, and the message display indicates

. The printer is now ready to print.
Stack Selection
The STACK key selects the tray to which the printed pages are delivered. The STACK key can be used
whenever the message display indicates

.
Press the STACK key. The selection toggles and is momentarily displayed in the message display as:
# &  
# &

  
The current selection is indicated by a green light on the printer symbol
above the key.
Also, if the printer is being used with the optional sorter or stacker, the
destination of the paper from each can be selected.
Power Switch