Kenwood TK-5410 - Manual (Page 27)

7
Programmable Function Con FM Con P25
Trunk
P25
Status ,2,7 ✓ Mix ✓
System Search N/A N/A ✓
Tactical Group  ✓ Mix N/A
Talk Around ✓ ✓ ✓
Talkgroup 2 Mix ✓ N/A
Tone ✓ ✓ ✓
Vibrator  ✓ ✓ ✓
VOX ✓ ✓ ✓
Zeroize ✓ ✓ ✓
Zone Down ✓ ✓ ✓
Zone Select  ✓ ✓ ✓
Zone Up ✓ ✓ ✓
 2-tone, Scan Program, Selcall, Selcall Status, Status, Send the GPS
Data, Tactical Group, and Vibrator are available only on the TK-20/
TK-30.
2 2-tone, Autodial, Clock, Display Character, Individual, Key Delete,
Keyset, Light, Operator Selectable Tone, OST Down, OST Up, Rekey
Request, Scan Program, Scrambler/ Encryption Code, Selcall, Selcall
Status, Squelch Level, Status, and Talkgroup are available only on
K2/K3/K/K/K7 model transceivers.
3 Channel Select can be programmed only on the Selector knob.
 Emergency can be programmed only on the Auxiliary (orange) key
and the optional speaker/ microphone PF (orange) key.
 Keyset and Rekey Request can be used when set as P2 OTAR.
 Playback is available only if the VGS- optional board has been
installed.
7 Selcall, Selcall + Status, Send the GPS data, and Status cannot be
used when the transmit mode is set as Conventional P2.
8 Speaker Attenuation can be programmed only on the microphone
programmable function keys.
 Zone Select can be programmed only on the Selector knob, the
Concentric switch, and the Lever switch.