Complete the finished wall, Install the faucet trim install handles and spout, Cleanćup after installation – Kohler VINTAGE K-1172 User Manual

Page 8: Important care and cleaning information, Call us for help

Advertising
background image

8

Kohler Co., Kohler WI U.S.A.

110050-2-

AB

10. COMPLETE THE FINISHED WALL

Cover the framing with waterĆresistant wall material, as

shown. Seal the joints between the bath rim edge and the

wall material with silicone sealant.
Tape and mud the waterĆresistant wall material. Install

the finished wall to the waterĆresistant wall material as

shown for your installation. Seal the joints between the

whirlpool rim and the finished wall material with

silicone sealant.

Apply Silicone

Sealant

Whirlpool

Finished Wall

Material

WaterĆResistant Wall

Material

11.

INSTALL THE FAUCET TRIM

INSTALL HANDLES AND SPOUT

After the deck is finished, attach the handles and spout to

complete the faucet installation according to the faucet

manufacturer's instructions.

12.

CLEANĆUP AFTER INSTALLATION

Remove stubborn stains, paint, or tar with turpentine or

paint thinner. Do not allow cleaners containing

petroleum distillates to remain in contact with

any whirlpool surfaces for long periods of time.

Remove plaster by carefully scraping with a wood edge.

Do not use metal scrapers, wire brushes, or other

metal tools. Use a powderĆtype detergent on a damp

cloth to provide mild abrasive action to any residual

plaster. When cleaning up after installation do not

use abrasive cleansers, as they may scratch and

dull the bath surface. Use warm water and a liquid

detergent to clean the surface.

13.

IMPORTANT CARE AND CLEANING INFORMATION

Keep your cast iron product looking new by rinsing it
out thoroughly after each use. If the surface gets
excessively dirty, use a general purpose cleaner such
as: Clorox

R

Clean Up, 409

R

All Purpose, Mr. Clean

R

Top Job, Lysol

R

Foaming Disinfectant, Dow

Bathroom Cleaner, or Fantastik

R.

Do not use abrasive cleansers or solvents on cast
iron products

.

www.kohler.com

In the U.S.A., call 1-800-4-KOHLER

In Mexico, call 001-877-680-1310

In Canada, call 1-800-964-5590

CALL US FOR HELP

Questions? Problems? First review the installation instructions to ensure correct installation. For additional

assistance, call our Customer Service Department for direct help. You may also contact us at our web site listed

below.

E

2001 Kohler Co.

Kohler Co., Kohler, WI U.S.A.

Advertising
This manual is related to the following products: