KORG EasyStart microX - Manual (Page 11)

Setup
8
Setup
Setting up the microX/X50 Editor
If you want to use the microX/X50 Editor with the microX/X50 connected to your
computer via USB, you must make sure that you have finished installing and setting-up
the KORG USB-MIDI Driver before you start up the microX/X50 Editor.
1 Use a USB cable to connect the microX/X50’s USB B connector to the USB port of your
computer.
2 In the microX/X50’s Global mode, make sure that MIDI Filter “Exclusive” is on (the
check box should be checked). (The factory setting is on.)
3 Start up the microX/X50 Editor and verify that it’s operating correctly.
Windows XP
Starting up the microX Editor
Navigate to the “KORG” folder -> “microX” folder, and double-click the “microX
Editor.exe” icon.
The “KORG” folder is in the location you selected during installation. By default it’s in
the “Program Files” folder.
Alternatively, you can start up the editor by clicking the taskbar [Start] button -> [All
Programs] and then pointing to “KORG”-“microX”-“microX Editor.”
Starting up the X50 Editor
Navigate to the “KORG” folder -> “X50” folder, and double-click the “X50 Editor.exe”
icon. (Refer to “Starting up microX Editor.”)
Mac OS X
Starting up the microX Editor
Navigate to the “Applications” folder - “KORG” folder - “microX” folder, and double-
click the “microX Editor” icon.
Starting up the X50 Editor
Navigate to the “Applications” folder - “KORG” folder - “X50” folder, and double-
click the “X50 Editor” icon.