KORG EasyStart microX - Manual (Page 18)

Setup
15
Digidesign - Pro Tools LE 6
1 Start up Pro Tools LE 6, and open a session.
2 Create an audio track, and start up “microX/X50 Plug-In Editor.”
3 Create a MIDI track. Choose “microX/X50 Plug-In Editor” as the output of that MIDI
track.
4 To route the microX/X50’s audio signal to Pro Tools LE 6, create an audio track or an
AUX input track. As the input, select the audio interface input to which you’ve
connected the microX/X50’s audio signal.