Care and cleaning, Service and customer care – Kenwood FS620 User Manual

Page 4

Advertising
background image

Stir large amounts half way through
cooking.

Smaller amounts cook faster than
larger amounts.

Similar-sized pieces of food cook
evenly.

Like a conventional oven, you can
add food as you go along. If
something needs less time, add it
later.

If you lift the lid, steam will escape
and cooking will take longer.

Food will keep cooking when your
steamer switches off, so remove it
immediately.

The cooking times on pages 5 - 6
are guides based on using the lower
basket. The higher the food is, the
slower it cooks. So allow an extra
5 - 10 minutes for food in the next
basket above. Check that food is
thoroughly cooked before eating.

If your food's not cooked enough,
reset the time. You may need to top
up with water.

care and cleaning

Before cleaning, always switch off,
unplug and let everything cool.

Never put your steamer base in
water or let the cord or plug get wet.

cleaning the base

Wipe with a damp cloth, then dry.

all other parts

Wash in warm soapy water, then dry.

For storage, stack the baskets one
inside the other, starting with the
highest numbered basket and
finishing with basket number 1

ᕢ.

descaling

The appliance should be de-scaled
once a month or after every 30 uses
depending upon which comes first.

1 Fit the water tank and fill with 200ml

of household appliance descaler,
then fill the water tank up to the
MAX level with water (approximately
800ml).

2 Fit the drip tray, one basket and the

lid.

3 Plug in the appliance, switch on and

allow the steamer to operate for 5
minutes.

4 Switch off and unplug the appliance

and allow to stand overnight.

5 Empty and discard the descaling

liquid.

6 Wash the removable water tank, drip

tray, basket and lid in warm soapy
water, then dry.

7 Refill the water tank with fresh water,

refit the parts and allow to run for 5
minutes. Empty and discard any
remaining water.

8 Wash the water tank, drip tray,

basket and lid in warm soapy water.

9 The appliance is now ready for use.

service and customer
care

If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.

If you need help with:

using your steamer

servicing or repairs
Contact the shop where you bought
your steamer.

4

Advertising