Kyocera 82-G1770-1FP - Manual (Page 10)

7
7. Click Use the following IP Address .
To assign an IP address, enter the following IP address , Subnet mask , and
Default gateway IP addresses:
IP address: 192.168.0.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
8. Click OK to close the Internet Protocol (TCP/IP) Properties window.
9. Select OK to close the Local Area Connection Properties window.
Note: It may take several seconds for this window to close.
Prepare Your Router for Firmware Recovery–Windows 2000
1. Using the tip of a paperclip, press and hold the RESET button, while
simultaneously plugging in the power supply via the power adapter receptor.
Receptor for Power
RESET Button LAN Ports