Operation, Important – Kompernass KH1220 User Manual

Page 10

Advertising
background image

- 4 -

Operation

Temperature control of wine

With this wine cooler cabinet you can tune it to operate
at temperatures between 4°C and 22°C.

Tips:

• Subject to the ambient temperature, the appliance

effects a maximum cooling of 15°C. The lowest
attainable temperature lies by 4°C. This means
that, if you want to cool beverages down to 4°C,
the ambient temperature may amount to no more
than 19°C.

• You should therefore place the wine cooler cabinet

at the coolest possible location, one that is not
warmed up by the sun.

• Do NOT place it adjacent to heat-radiating

appliances such as heating elements or stoves.

• The appliance cannot effect a warm-up. If the

room temperature is cooler than the adjusted
temperature, the refrigeration switches itself off.
The temperature then comes to a maximum of
the ambient room temperature.

• To achieve a good cooling performance, lay at

least three bottles in the appliance.

1. Insert the power plug 8 into a wall socket.

Ensure that the power being supplied from the
wall socket tallies with the power details given
on the type plate.

2. Press the button ON/OFF

5. After a brief

moment the display 1 shows the interior tempe-
rature of the wine cooler cabinet.

3. Press either the button

2 or

3 to set

the desired temperature.
The display 1 blinks and shows the programmed
temperature. When you stop pressing the button
the blinking stops and the display 1 shows
once again the current interior temperature.
The wine cooler cabinet now slowly cools down
to the programmed temperature.

• To switch the wine cooler cabinet off, press the

button On/Off

5. The programmed tempe-

rature is erased. With the next switch-on of the
appliance the temperature must be once again
programmed in.

Tip!

Always fill the wine cooler cabinet from the bottom
to the top. This will cool the bottles faster.

Illumination

If you wish, you can switch on illumination in the
interior of the wine cooler cabinet. For this, press
the Light

4 button. When you wish to switch

the light off, press the button Light

4 once

again.

Note:

Illumination contributes to a warming of the interior.
Therefore, switch the lighting off if it is not needed.
This also saves energy!

Important!

As the light diodes in the interior of the wine cooler
cabinet have an extremely long lifespan it is not
necessary, and also not possible, to exchange them.
The light diodes are firmly assembled into the illumi-
nation. Under no circumstances should you open
the illumination! This would irreparably damage the
appliance.

IB_KH1220_E23705_LB6 18.07.2008 13:57 Uhr Seite 4

Advertising