Kompernass KH1220 - Manual (Page 9)

- 3 -
Technical data
Rated voltage: 220 - 240 V ~ 50Hz
max. Power consumption: 70 W
Temperature range :
4 - 22°C
LED-Class: 1
Description of the appliance
1 Display
2 Temperature increase button
3 Temperature decrease button
4 Light button
5 ON/OFF button
6 Door
7 Grip
8 Power cable with power plug
9 Adjustable feet
0 Bottle grill
q Ventilator
w Spacer
Before the First Use
Assembling the adjustable feet
To assemble the adjustable feet 9 it is best to lay
the cooler cabinet on its side.
Note:
One of the adjustable feet 9 is somewhat shorter
than the other three. This adjustable foot must be
screwed into the threaded hole located to the front
right of the hinge retainer.
• Screw the adjustable feet 9 into the designated
threaded holes at the corners on the underside
of the appliance.
Assembling the spacer
Important!
NEVER operate the appliance without the spacer w!
The ventilation slits could become covered. This
would lead to overheating and cause irreparable
damage to the appliance.
• Screw the spacer w onto the rear of the cooler
cabinet, as shown on the fold-out side.
Placement of the bottle grill
• Slide the bottle grill 0 into the guide rails.
Ensure that the recesses for the bottles point
downwards.
Note:
• Slide the bottle grills 0 along the guide rails until
they engage. If the bottle grills 0 do not engage,
they have been inserted the wrong way round.
• You can also stand the bottles upright in the wine
cooler cabinet. To do this, remove the bottle grills 0.
Placement
Important!
When the appliance is in use, ensure that the venti-
lation slits and the ventilator q cannot be covered.
Risk of overheating! Maintain a clear distance of
approx. 15 cm between the ventilation slits and
other objects.
Place the wine cooler cabinet on to a clean and
level surface.
Should the wine cooler cabinet sway a little, the
unevenness of the footprint can be levelled by cali-
bration of the adjustment feet 9. For this, turn the
appropriate adjustment foot 9 until the wine cooler
cabinet is standing firmly.
IB_KH1220_E23705_LB6 18.07.2008 13:57 Uhr Seite 3