Kalorik USK HA 31535 - Manual (Page 6)

Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame.
6 USK HA 31535 / 33143 - 110127
Assembly page 6/28
Fax +32 2 359 95 50
This can lengthen the lifespan of the machine. Failure to follow
this instruction carefully may result in damage to the motor.
• To avoid spillage or overflow, please process food according to
the specified maximum capacity:
40 Oz. / 1200ML capacity for dry food
66 Fl.Oz. / 2000ML capacity for liquids
FIRST USE
After unpacking, disassemble unit before using first time. Refer to
“HOW TO DISASSEMBLE” for directions.
Wash all parts except motor base in warm, soapy water. Rinse and
dry immediately. Be careful: blades are sharp. Motor can be
cleaned with a slightly damp cloth.
DO NOT PUT ANY PARTS IN AN AUTOMATIC DISH-WASHER. DO NOT
IMMERSE MOTOR BASE IN WATER.
ASSEMBLY AND OPERATION
IMPORTANT NOTICE: When assembling the bowl on the base, please
make sure to always position the handle of the bowl on the right side,
facing the food processor, or the safety switches will not be triggered
and the appliance will not work
CHOPPING BLADE ASSEMBLY
• Position the driver (2) upright on motor base (1).
• Position the processing bowl (3) around the driver onto the motor
base and turn clockwise to lock it on the motor base.
• Place blade adaptor (4) onto the driver.
• Cautiously place the chopping blade (11) onto the blade
adaptor. The blade shall lie flat, if in correct position, and not be
wobbly
• Place the food into the bowl.
• Place lid on bowl, turn clockwise until the lid interlocks on bowl.