Safety precautions, Important safeguards, Caution – Kenwood KVX-5 User Manual

Page 2

Advertising
background image

2

EN

Safety Precautions

Caution: Read this page carefully to ensure safe operation.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

Please read all of the safety and operating instructions before operating this unit. For best
results, follow all warnings placed on the unit and adhere to the operating and use instruc-
tions. These safety and operating instructions should be retained for future reference.

1. Power sources — The unit should be connected

to a power supply only of the type described in
the operating instructions or as marked on the
appliance.

2. Power-cord protection — Power-supply cords

should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the unit.

3. Enclosure removal — Never remove the enclo-

sure. If the internal parts are touched acciden-
tally, a serious electric shock might occur.

4. Drop — Do not drop the unit or apply strong

shock to it. (Damage due to dropping the unit is
not covered by the warranty.)

5. Ventilation — Avoid hindering the ventilation of

the unit by covering it with a cloth, etc.

6. Abnormal smell — If an abnormal smell or

smoke is detected, immediately turn the power
OFF and pull out the power cord. Contact your
dealer or nearest service center.

7. Heat — Avoid placing the unit under direct sun-

light or near a source of heat such as heating
equipment.

8. Temperature — The unit may not function prop-

erly if used at extremely low, or freezing tempera-
tures. The ideal ambient temperature is above
+5°C (41°F).

9. Water and moisture — The unit should not be

used near water — for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.

10. Dust and moisture — Avoid places where is

dusty or where the humidity is high.

11. Vibrations — Avoid placing the unit on an un-

stable place such as a shelf or in a place subject
to vibrations.

12. Magnetic fields — Keep the unit away from

sources of magnetic fields such as TV sets,
speaker systems, radios, motorized toys or mag-
netized objects.

13. Handling of the LCD Panel

• Do not scratch the LCD panel, apply a strong

pushing force to it or subject it to strong im-
pacts. Doing so could cause damage to the
panel.

• If the LCD panel is broken, do not touch the

liquid inside the panel. If this liquid gets in your
eyes or mouth, or gets on the skin, rinse thor-
oughly with water and consult your physician.

14. About the Unit’s Stand

• Do not apply strong force when opening the

stand. Doing so could damage the stand.

• The stand could be damaged if a strong push-

ing force is applied to unit when the stand is
in use. Be careful not to apply a strong force
to the unit.

15. Cleaning — Do not use volatile solvents such as

alcohol, paint thinner, gasoline, or benzine, etc.
to clean the cabinet. Use a clean dry cloth.

16. Nonuse periods — The power cord of the unit

should be unplugged from the outlet when left
unused for a long period of time.

17. Damage requiring service — The unit should

be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been

damaged.

B. Objects have fallen, or liquid has been spilled

into the unit.

C. The unit has been exposed to rain.
D. The unit does not appear to operate normally

or exhibits a marked change in performance.

E. The unit has been dropped, or the enclosure

damaged.

18. Servicing — The user should not attempt to

service the unit beyond that described in the
operating instructions. All other servicing should
be referred to qualified service personnel.

19.

CAUTION

TO PREVENT ELECTRIC

SHOCK DO NOT USE THE AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.

Advertising