Kenwood KVX-5 - Manual (Page 9)

9 EN
VOLUME 50
AV1
INPUT
AV2
VOL.
Select either one of the two AV inputs by using the AV1 or AV2 button.
Turning on the power selects the AV input selected just before the power was turned off.
• Pressing the AV1 button displays “AV1” at the upper right portion
of the screen for several seconds, receiving AV signals from AV
equipment connected to the AV1 terminal.
• Pressing the AV2 button displays “AV2” at the upper right portion
of the screen for several seconds, receiving AV signals from AV
equipment connected to the AV2 terminal.
Note: If a selected AV input terminal does not receive video signals, “NO SIGNAL” ap-
pears at the bottom of the screen.
AV1 AV2
[When the AV1 button is pressed] [When the AV2 button is pressed]
Selecting AV Input
MUTE
Adjusting the Sound Volume
Press the VOL.
5/∞ button to adjust the sound volume.
Adjustment values appear on the screen during adjustment.
Muting Sounds:
Pressing the VOL.
5 and ∞ buttons at a time mutes sounds. “MUTE” appears on the screen
in red.
• Pressing either VOL.
5 or ∞ button releases the system from muting. Turning off the power
also releases the system from muting.
Up
Down