Samsung SGH-S105 - Manual (Page 36)

Messages
66
Default Type: allows you to set the default message
type (Text, Fax, Email and Paging). The network
can convert the messages into the selected format.
Default Validity: allows you to set the length of time
for which your text messages will be stored at the
message center while attempts are made to deliver
them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Setting: four options are available.
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
message center, if the service is provided by the
network.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether your
message has been delivered or not.
Bearer Selection: allows you to choose between
GSM and GPRS.
Wap Push: allows you to select whether you receive
Web messages from the server or not. Select
Never if you do not want to receive any messages,
Always to receive all messages, and SMS-C
Specific to receive messages from a specific SMS
center.
Messages
67
Broadcast
(Menu 1.5)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
• The phone is in idle mode
• The Receive option is set to Enable
• The message channel is currently active in the
channel list
The following options are available.
Read: lets you view the message. Volatile
displays the messages from the network, but loses
its contents as soon as the phone is switched off.
Scroll through the message by using the
and keys. While reading a message, press the
Save soft key to store the message in the Archive
box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available.
Select: used to enable or disable channels in the list
by marking or unmarking them respectively (a
check mark is displayed in front of each channel
selected).
Add Channel: used to declare the ID and title for a
new channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.