Extra settings – Samsung SGH-S105 User Manual

Page 45

Advertising
background image

Phone Settings

84

Auto Light

Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
conserve your battery power.

The following options are available:

Disable: the backlight is used according to the
setting in the Back Light menu option
(Menu 4.7.2); see page 83.

Enable: the backlight is used only during the
specified period of time. Set the required length of
time in hours and minutes, using the appropriate
number keys.

Service Light

This option allows you to select whether or not the
service light on the top of the phone is used or in
which color it flashes.

Select the required color from red, green, blue,
yellow, cyan, violet and white. When the phone is
ready for use, the service light will flash in the
appropriate color.

If you do not wish to use the service light,
select Off.

Graphic Logo

This option allows you to display your operator’s
logo instead of its name.

On: the operator logo stored in your phone is
displayed in idle mode; if no logo has been stored,
the operator name is displayed.

Off: the operator name is displayed in idle mode.

Phone Settings

85

Extra Settings

(Menu 4.8)

You can turn the automatic redialing or answering
features on or off.

The following options are available.

Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.

Note: The interval between two call attempts varies.

Active Flip: when this option is checked, you can
simply open the folder to answer a call.

When it is unchecked, you must open the folder and
press a key, depending on the setting of the
Anykey Answer option (see below).

Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
key, except the

key, C key and the Reject

soft key. To reject the call, press the

key or

the Reject soft key.

When this option is unchecked, you can only press
the

key or Accept soft key.

To turn a
feature...

Press the...

on

ON soft key.
A check mark is displayed in
front of the option.

off

OFF soft key.
The check mark is no longer
displayed.

Advertising
This manual is related to the following products: