Konftel 300W - Manual (Page 19)

17
sWiTCHinG linEs DURinG CAlls
Connecting a new line during a call
You can add another line or switch between connected lines during a call.
 Press the linE MoDE button during the call.
An indicator appears on the display screen in front of the selected line(s).
 Use the arrow buttons to mark the line you want to connect and confirm your choice
by pressing oK.
If you selected USB or MOBILE, this line will open. You then connect the call via the computer
or mobile phone.
If you selected DECT, you will hear a dialling tone. You then dial the number on the Konftel
300W or use the Phonebook.
 Press the linE MoDE key again to close the line mode.
Putting a line on hold during a call
 Press the linE MoDE button during the call.
 Use the arrow buttons to mark the line you want to put on hold and press the HolD
button.
The indicator in front of the selected line starts to flash.
 Repeat the above to reconnect the line.
 Press the linE MoDE key again to close the line mode.
Disconnecting a line during a call
 Press the linE MoDE button during the call.
 Use the arrow buttons to mark the line you want to disconnect and confirm your
choice by pressing .
The indicator in front of the selected line goes out and the line is disconnected. The other calls
can continue.
 Press the linE MoDE key again to close the line mode.
DURinG A CAll