Konica Minolta Bizhub C20P - Manual (Page 170)

Replacing Consumables 156
5
Remove the hook, and then
remove the backup battery.
6
Insert a new backup battery.
"
When inserting the new
backup battery, be sure
that the + side faces
toward the left.
"
Risk of explosion if bat-
tery is replaced by an
incorrect type. Dispose of
used batteries according
to your local regulations.
Do not burn the backup
battery.
7
Reinstall the panel and tighten the seven screws.
8
Attach the rear cover.
9
Reconnect all interface cables.
10
Reconnect the power cord, and
turn on the printer.