Konica Minolta Bizhub C20P - Manual (Page 56)

Configuration Menu Overview 42
TRAY 3 PAPER
SIZE
The size of paper loaded in Tray 3 is
indicated.
This menu item only shows the current
setting. This setting cannot be changed.
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper
loaded into Tray 3.
TRAY
CHAINING
Settings
ON /OFF
If ON is selected and the specified tray runs out of
paper during printing, a tray loaded with paper of the
same size is automatically selected so printing can
continue.
If OFF is selected and the specified tray runs out of
paper, printing stops.
TRAY
MAPPING
TRAY
MAPPING
MODE
Settings
ON/OFF
Select whether or not the Tray Mapping
function is used.
LOGICAL
TRAY
0-9
Settings
PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL
TRAY 1 is PHYSICAL TRAY1 . The
default setting for all other trays is PHYS-
ICAL TRAY2 .
"
PHYSICAL TRAY3 appears only if
an optional lower feeder unit is
installed.