Konica Minolta Bizhub C20P - Manual (Page 136)

Duplexing 122
Duplexing
Select paper with high opacity for duplex (double-sided) printing.
Opacity refers to how effectively paper blocks out what is written on the oppo-
site side of the page. If the paper has low opacity (high translucency), then
the printed data from one side of the page will show through to the other side.
Check your application for margin information. For best results, print a small
quantity to make sure the opacity is acceptable.
Note
Only plain paper, 60–90 g/m 2 (16–24 lb bond) can be autoduplexed. See
“Media Specifications” on page 100.
Duplexing envelopes, labels, postcards, thick stock, glossy media or
transparencies is not supported.
How do I autoduplex?
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip
at the top.
If “Long Edge” is selected, the pages will be laid out to flip
at the side.
1
3
1
2
1
1 1
1
1
2
3